...Fellowes shredder uses an optical sensor to sense the presence of paper in the throat of the unit. The possible cause is something blocking the sensor or worst case scenario the board that controls ...
fellowes paper shredder shredder run only on reverse mode, i replaced the sensor still not working Though I only work with Fellowes shredders this sounds like a paper feed sensor issue. If your unit ...
Question about Powershred P-55C Light-Duty Confetti-Cut Paper Shredder, Black
...Fellowes Shredder will not turn off in the auto mode, it runs continuously. It will turn off in the off mode and will also work in the reverse mode. You need to clean the paper feed sensors. You can ...
...Fellowes DM15C? There are two sensors (look like little light bulbs) on the top part of the shredder at either end of the blades. If you pull out the drawer and turn the shredder upside down you will ...
Fellowes Paper Shredder P70CM paper jam My shredder jammed. I removed all paper pieces I could and it now works in reverse, but will not move forward (no sound or motion at all). What should I do to ...
shredder won't turn off at first cleaning the sensor works. Now nothing works except unpluging or turning the power off The sensors probably need replacing. Most larger Fellowes shredders come with a ...
...Fellowes DM8C is working like a brand new shredder. At first, I cleaned the sensors several times and it did not work. Then, I disassembled the shredder head, removed the two sensors, cleaned them ...
...FELLOWES CROSS CUT SHREDDER WILL KEEP ON RUNNING AFTER THE PAPER HAS BEEN SHREDDED. ARE THERE SENSORS THAT COULD POSSIBLY BE COVERED IN PAPER DUST? If you look into the slot you feed the paper into, ...
...FELLOWES SAFE SENSE SENSOR WON'T WORK ON SHREDDER. IF YOU DISABLE THE SAFESENSE, THE LIGHT WILL FLASH, BUT WHEN ACTVATED IT DOESN'T LIGHT OR STOP THE SHREDDER Use a cotton bud dipped in alcohol and ...
Question about PS70-2CD Shredder
...fellowes ps-70 shredder has a light on and it's not working the middle light on the left turns on and the shredder does not want to work. If the shredder is the kind that turns on when you insert ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions