...Fellowes 420 Powershredder won't shred. The red light stays on even after I clean the top inside of the shredder. It will work for one shredding and then the red light comes back on and it will only ...
Fellowes powershred 320 Works fine in reverse but won't go forward, tries to then stops. Shear pins in place all gears working, lights on. Any suggestions? Thanks Ken seems to be an issue with the ...
Powershred 380-c Shredder keeps stopping with the red trash symbol showing - which normally appears if bag is full or shredder is jammed. Even if I empty the bag and clear the shredding 'teeth' the ...
The red light stays on and the shredder won't work Unplug the unit take it apart 7-9 screws on back , gently pry it apart , probly dirty as heck in there or somethings jammed in there, also clean off ...
Fellowes C-420-c, paper jam light always on Fellowes C-420-c, paper jam always on try calling Fellows at 1-800-955-0959 for help and to find nearest service center.
I have a fellowes shredder 380C that I am looking for a parts list. I need to replace one of the plastic wheels. Some of the teeth were broken in a jam and can fix it myself but can't seem to find a ...
my shredder runs continually. i have oiled it and have made sure that there was no paper in the teeth. any ideas as to fix this? clean the two sensors that are located in the middle of the throat area
Question about Powershred 420 Shredder
Motor will go in rerverse but red light comes in foward shred and will not go I wish the manual said to clean the sensors. I had the whole thing apart. Cleaned her real good. Put it back together. ...
Question about Products - Powershred Shredder Bags f/Models C-420/420C/480/480C 50 Bags Ties/Carton - Sold As 1 Carton - Neatly fits waste receptacles and bag frames of general office paper shredders. - Convenient bags keep work areas clean. - Includes easy-to-use
...to the manual; look for your model and down load it. It might be of some help to you, Good Luck. Fellowes Shredder ...
Question about Powershred C-420/420 (Confetti-Cut) Shredder
how to reset oil sensors on a c420 c the oil light will not turn off Your manual will guide you through it with no problems. You can not reset the sensor. You can try to loosen it up but typically you
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions