Fellowes P400C shredder It will work in reverse and goes on in forward but sounds rather rough and won't take paper. Sounds like out of alignment. Actually this is more than likely a broken gear. ...
shredder and it has worked on 3 pieces of paper. It makes a clicking sound when in the "auto/on" possition and a slice of paper is placed in the feeder, but, that is it. I have no manual and no way to
fellowes p45C Shredder just stopped accepting paper on automatic feed. It will run in either reverse or steady on, but will no longer accept paper through auto feeder. This shredder is only a year old
Fellowes P500-2 Shredder Shredder is stuck in reverse and won't shred. switch on top sounds bad . wont hurt to UNPLUG the unit open it up and clean it out , then see what its doing
would like to buy a replacement plastiic cog for fellowes p50cm shredder Fellowes do not make replacement gears for these machines [email protected]
...shredder is not shredding, its just making a granding sound but the blades are not moving plastic gears are broken. don't think fellows make replacement parts for small personal shredders. get a new ...
...shredder off the bin, you probably need to make sure that the safety is engaging properly. If the motor seems to sound very labored when it runs, unplug it, and check the blades to make sure there's ...
Shredder starts to shred, then makes a loud noise, and blades don't turn sounds like a couple of teeth on a drive gear may be broken. call Fellows at1-800-955-0959.
spare parts for a fellows p45-c shredder plastic spur gears Can I get my Fellowes paper shredder repaired or purchase parts for it? The majority of Fellowes personal shredders (small shredders that ...
source for gear for fellowes 301101 DS-1 paper shredder how to find replacement gear Replacement Parts - Paper Shredders Can I get my Fellowes paper shredder repaired or purchase parts for it? The ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
