Questions & Answers for: Canon feeder cover

...feeder cover...open feeder,and take it off from the sides..there are little wings that pop out of socket, and look at the black toggle arms... one most likely is dislodged...make sure they all toggle ...

...manisvx Thanks for last rating!! Remember you cant make the rollers turn in test mode.You have to strip the feeder top cover to change the dip switches. I am not allowed to give that info on the

...cover of the document feeder and look inside where the paper goes into machine. There is a flag that comes loose and the machine thinks there is paper in the feeder. You have to remove the top cover ...

...feeder cover" and press ok to eject the document. I pushed ok, and there is no document to eject. I've closed all the covers, including the feeder cover, I put a document through the feeder to ...

Feeder Cover. Remove the jammed page from under the roller to the Feeder Cover side. Pull out the jammed document from the ADF. If the document cannot be easily pulled out, proceed to section Document

It says "close feeder cover" and have alarm light It says "close feeder cover" and have alarm light on my printer, please tell me what shoud I do and where is located "feeder cover?

...Feeder Cover. 4. From under the roller to the Feeder Cover side, remove the jammed page. 5. If a document is not jammed, check the document feed area if there's foreign material. If there's any, ...

object stuck in Canon MF 8050cn document feeder Hi there is a small lizard stuck in the document feeder of my Canon MF 8050cn feeder! Try to open the ADF Cover can easily remove it

...cover. Clean the automatic document feeder If the product picks up more than one sheet of paper from the automatic document feeder (ADF), clean the rollers and the separator pad in the ADF. Step one: ...

...to the pick rollers? Check the plastic lever that is attached to the upper feeder cover. Make sure the upper cover is closed properly Verify that the dark colored sensor is clean in the feeding ...