Questions & Answers for: feed problems Cars & Trucks

1996 jeep cherokee 4.0 litre petrol turns over but not start found no positive feed to crank sensor or distributer and injecters not pulsing after a while car started . feed returned (5 volts) can ...

...a single line fuel pump for a small block my truck was a six the fuel tank has a vent line and a feed line on the sender the problem I have now it the pump has two lines can i put an older fuel ...

Campbell Hausfield wire welder feeds after trigger release! I have a Campbell Hausfeld Flux Core Wire Feed Welder Model WF2150 and I was welding with it and it keep feeding the wire after I released ...

...problems at all with this vehicle ,i suspect that somehow these lights are picking up a feed from somewhere ,but where ??is the 100euro question ,i would suspect the radio , their are two feeds a ...

...'87 S-10. front markers work but no taillights. start at the back and work forewards checking for a feed ,if feed its a ground problem ,if no feed just follow and check connectors ,all else fails run ...

...what else could it be? havent heard of that for a long while -.MOT anyway have you checked for a feed to the switch first as this could be the problem no feed for whatever reason ,if a feed to the ...

...wrong?? most likely problem is the stalk switch ,take the shroud off the steering and check for a feed if you have a feed then replace the switch ,if no feed then then work backwards checking the ...

...on when car was turned on and off when car was turned off, untill today. The radio has 2 power feeds, one is wired to battery so it has power all the time for memory and the other power feed is ...

My Dell 1350cnw will not feed paper. The main roller feeds a sheet about an inch then the feed jams. When paper does feed, print quality is still excellent. I live at 3750 feet elevation in a dusty ...

...that sort of current ... a relay coil possibly. Remove the relays and check again otherwise remove feeds to other places or check the alternator feed and ECU