...registration not correct copies do not match the master copy ou need to either advance (paper feeds quicker) or elay paper feed there has to be a registration adjustment It can be as simple as ...
Paper feeding problems Riso TR1510 The two large wheels pull the paper into the machine. Once the paper is halfway in it stops and the jam light comes on. It seems like a timing issue. The paper ...
Riso GR3770 will not pull the paper through once it passes the initial feed assembly. The paper ''picks up'' just fine, but after the lead edge enters the machine, it kicks off impression and gives a
I have a check paper feed area message on my screen. check for miss feed or jammed paper in the paper feed area
risograph rz220 paper not feeding paper not feeding correctly. when it starts to feed it flutters and then usually jams If paper is fluttering while feeding, what is actually happening is that the ...
We have a gr 3750 and when the paper tray comes up the feed wheels do not start up to feed the paper in.Any suggestions the bearings in the paper feed rollers are they facing out and check the paper ...
Question about RZ220 Duplicator
...sideways 10mm, light gone out and machine won't start again, display panel just says check paper feed area re; fr3950EP machine, I moved the paper sideways 10mm, light gone out and machine ...
Riso GR3750 We have a Riso GR3750 and are trying to print envelopes. It will send a few envelopes through, and then it won't pick one up and the printing stops. The problem seems to be that ...
Error A-01-211. Master roll not feeding properly. I just picked up a used Risograph RZ 220. I keep getting an error message A-01-211. The highlighted problem area on the icon lights up as area 4, ...
feeding envelopes Envelopes get jammed in the feeding tray Envelopes have always been a problem with the Riso feed mechanisms. Most envelopes have an imperceptible coating on them to allow them to ...
Usually answered in minutes!
37 Questions
5 Questions
4 Questions
378 Questions