Questions & Answers for: Lexmark fax picking faxes

...faxes when people try to fax me the fax does not come through. my answering machine is set on 5 rings, my voice mail is set on 4 rings and the fax is set on 3 rings. I have been on the phone with ...

...fax part of my system ahas not worked since faxing some fine paper time sheets to my husbands boss cant send faxe since system is still under warrenty Does it give you an error? no it says it is ...

The fax picks up every call When the printer is on and the auto answer is on the machine picks up all calls as a fax. Is there a way to have the machine recognize whether it is a fax or a phone call? ...

...fax tones are detected". If this is turning out to be too unreliable for you, you will need to either manually receive incoming faxes (by changing the setting to "Manual"), or you will need to at ...

faxes automatically, I suggest you configure the printer to pickup after the 2nd or 3rd ring before your voicemail picks it up. On the User's Guide, go to Faxing, Receiving a Fax for the instructions.

also block incoming faxes. Once voicemail picks up the fax, signal won't be passed on to the printer. But if you want, you can also contact Lexmark technical support to further investigate the problem

I cannot receive incoming fax, what setting do I have to use Please go through the following checklist: Make sure to plug the telephone fax line from the phone jack in the wall to the Line port on the

Need to delay fax pick up time Please follow the steps below to configure the Pick-up On setting on your Lexmark X6650 printer: From the printer operator panel, press the Setup button. Go to Fax Setup

...fax:To make sure the printer picks up incoming faxes, set Auto Answer to On, and then set the printer to pick up after a greater number of rings than the answering machine. For example, if ...

...picking up) before the fax machine can pick-up (called the hand-shake, as in when you hear all the funny noises and tones that go back and forth between two machines) In any even, read your manual to ...