Questions & Answers for: faults baumatic electric oven

...Baumatic B600 oven. It was driving me mad! Very rattly and would change with temperature. I tried oiling the bearings...no good. I thought the fan was out of balance...wasn't. Was on the point of ...

oven fault code oven now has F4EO OR F4ED ON DISPLAY oven does not heat but fan and light work ok , any ideas ta john I think your thermostat is broken, try replacing it with a new one.

Baumatic BT187ss Oven All working EXCEPT fan assisted cooking The elements top and bottom are OK as it works in normal mode.The fan is OK as this comes on when it should with the grill. It is just the

thermostat light is on all the time - when i turn on the oven swtich to the B180SSB, the thermostat light is permanenelty on. i have just changed the element which the old one had burnt out Themostat ...

Oven has stopped heating up Baumatic B180SS single fan assisted oven has suddenly stopped heating up although the fan still works. I'm guessing either the element of thermostat has gone. How can I ...

The oven tripped the main fuse switch to the house while on and when i restored power the clock on the oven came on but nothing else works no grill, oven, fan or lights ??? you have to set the clock ...

...electric after 7 mins running but the top oven is fine why hi there the most likely cause for this is the element going into a fault condition as it warms up and expands your best bet is to replace ...

baumatic oven, no manual left, i don't know which model it is, but the green light near the squiggly line is now lit up when the ovens on and its smoking a lot, i'm guessing that its a fault light and

tripping fuse box There is an earth fault. check that the oven is wired correctly at both the oven side and the outlet it is wired into. Failing that check that oven control switch is wired correctly.

...Baumatic B180 cooker or oven then this diagnostic video will help you find the fault and i hope it helps you. i have put a link also so you can get the parts for your cooker cooker parts Need help ...