...still connected pull out and turn on side look in the back left corner (with Pwr off) there is a board there and it has a water (Flood sensor) on it make sure it is dry this is what the Fault code ...
...code u1-1 main motor fault dear sir. i have a mechine xerox 440,mechine did not work at this time,error code is that-u1-1 main motor fault. please solve my problem. thanks yours k.k.garg (india) You ...
Question about 23 in. DD-603SS Built-in Dishwasher
Xerox Combo Copier/scanner/printer error message U1-2 That code is normally a main drive motor fault.
...likely cause. It could also be as simple as a bad print cartridge or on that machine many issues. I can define it better for you if you go to the machine status and look up the recorded fault
code front door is open but it is in fact closed what do i do? there are two plastic sections, that when the door is closed, activate two switches telling the machine the door is closed. these plastic
Question about 23 in. DD-603SS Built-in Dishwasher
U1 Fill Fault 1 Turn the DishDrawer® water supply on. 2 Ensure the spray arm can rotate about the center, and if the DishDrawer® is full of water, it will need to be emptied manually. 3 Call
...code U1041 Codes U1XXX (where XXX stands for several possible numerical digits, 001 - 254) are communications fault codes. The first part (U1) tells you that there is a communication problem with one ...
Question about 23 in. DD-603SS Built-in Dishwasher
and beeps Hi there Ypowers, U1 fault code relates to the fill system. Is the tap turned on, is the spray arm position correctly and free to rotate, nothing blocking it?. I hope this helps regards Gary
Question about 23 in. DD-603SS Built-in Dishwasher
...fault code indicates that the washer is not filling with water. Check to be sure the water supply valves are open. Also, check to be sure the water supply hoses aren't kinked or clogged. Next, remove ...
...fault code U1 which shows up every so ofen I switch off the machine and it works again for a few weeks U1 is a filling fault , so you will have to check the water supply into the dish draw is turned ...
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions