Questions & Answers for: HP ProLiant fan running too fast

fan speed is there any way you can set the fans to run at one fixed speed? the fans keep the GPU's and CPU's at an "optimal temperature" that is why they start loud on "over RPM" and then quieten down

fan failure Hi there, I have a HP proliant dl 360 g3 server that I use to host a small radio station. The other night it went down so I went to check to see what's up. I first tried cntl alt delete to

FANs running at full speed system locks up Fans running at full speed means, the redundant fans start working. That means you have a problem with the cooling system. Check your air-conditioner at your

...running fast then usually that means your processor is overworked. I'd go for a fresh operating system if you can. The fans should come on really fast when its first turned on, then slow down after a ...

...fan failure and reboots all the time. My fans are spinning and the server manager reports the temperature as ok.this happens every day in the evening Hello, From my experience, this is an indication ...

...running) and server not accessible after every 3-4 days and when it occur all indicator blinks red and green violently and fan spin very fast if we restart the server it will run 3-4 days normally no ...

...fan is running. (if not it needs replacement). If you find it faulty, you may find and replace the fan by removing the old/ faulty fan by removing the 4 screws and installing the new one. Also, make ...

...running right away because users can't work because this server is a filer server which contains most of the data. Check and Clean Processor FAN and all cooling Fans inside the server.Check the ...

HP Proliant ML150 G2 beep codes, 1 slow, 3 fast, then 3 fast, one slow Google HP Smart Start. Download version needed. Unzip and burn. HP Management DVD is also available. It has ...

...Powered down using power button. Now no response to pushing power button. No Leds lit anywhere. Fans running on power supplies. Try pulling the hot swap Power supplies, push the power button hole ...