Questions & Answers for: Ford Contour fan relay

...relay switches the old fans only the low fan worked with the a/c on then cut off 5seconds later on and off it didnt keep the engine cool now the new fans dont work even with the a/c on even at ...

...fan relay? I was told that It may not be the relay because when the fan does work, all speeds work perfectly. Can you help? If you think I should check the fan relay, I do not knkow the location ...

relay of the AC fan with the radiator fan. If it turns on, have the relay replaced, if not have the fan replaced. The temperature sender unit is what activates the fan!!!! check it by earthing out the

is trying to turn the fan on. If you can't find the relay, please get back to me. Please see my tip at http://www.fixya.com/cars/r6022358-relay_check for instructions on interrogating the relay socket

...relay socket, you should detect two terminals with 12 volts and one with a motor load. The last terminal will be open until the PCM tries to turn the fan on--then it will be a ground signal. You'll ...

...fan(s), relay, fuse and engine temperature sensor's. Verify that the fans work by unplugging them and run jumper wires to the fan(s) from the battery. If they run, your problem lies elsewhere. If ...

...fan relay, or it could be a safety feature of the computer. if the computer finds a problem with the cooling fan or the engine temp sensor, it will turn on the fan to try to prevent overheating. Even ...

fan relay in cavity location # K-46 and the high speed relay is location # K-47! Also check the main cooling fan power fuse # 2 in the same BJB, The fuse is a MAXI-FUSE (large one) it is blue in color

...it is "Additional Fan Relay Circuit Malfunction." I would check the fan relay and all connections to it. If you can't find anything there, then I would guess it's probably a wiring issue

...fan relay. Check the fuse for the cooling fan, the cooling fan relay, and the fan itself for proper operation. You can use a multimeter to see if power is getting to the sensor. If not, and you find ...