Questions & Answers for: fan palm problems

...palm beach ceiling fan with the matching light kit. it said use a 75 watt halogen bulb. I cant get it to screw into the base, is it european base or what. Me too. I went back to Home Depot. They gave ...

and do I get at the fan by removing the palm rest? It should still be under warranty at 6 months old. If you attempt to repair yourself, you will void the warranty. Talk to Dell before you do anything

...palm beach 48' ceiling fan (close to ceiling mount)Problem is when turned on I hear an annoying hummmmmmmmmmmm, more of a hum at high speed and it graduates down with the speed change......HELP! ...

fan.htm#1000113 Remove the hard drive. Remove the keyboard. Remove the display assembly. Remove the palm rest. Remove the microprocessor thermal cooling assembly. Remove the two M2.5 x 5-mm screws and

...fan and heat sink. They may be dirty, and failure to maintain cleanliness on the inside of the box can and will result in overheating, and sluggish performance due to high temperatures.To clean : ...

...palm Sander is not "collecting" dust even with a new sanding bag, what could be the problem? Are you using the punch plate to put holes in the sand paper after you put on a new sheet? If you are it ...

...fan and radiator and quickly palm the radiator at the top, middle, and bottom and if the warm temp by feel is about the same, most likely the radiator is not the problem. Good luck, best

Can't figure out how to in tall blades have installed lots of fans have never had this problem. Can't get screwdriver in there because of light housing in the way instructions of no use help ...

fan palm air wiring speed control switch Is there a problem with the fan switch? Is sounds like you are wiring in a switch for a speed controlled fan. If that is the case, it is the switch itself that

fan? Do you hear it run? What color is the smoke? All of these things can tell you if your water pump is bad, or something much worse. Number 1, how many times have you driven it while it over heated?