Questions & Answers for: Hotpoint fan motor

...fan motor. Check and see if there is a button on the door frame. Depress the button and see if the fan will come on. Check for possible ice holding the fan blade from turning. If the fan blade is ...

...fan motor Sounds like it is bad.....no pun intended! ;) could you please let me know if it is difficult to replace and where to get the needed parts Power off first!...fairly easy to remove...the fan ...

...FREEZER DEPT MAKING NOISE MAYBE FAN MOTOR? if the fan is making noise it can also due to dust collected in the fan winks towards it end.or the other option is motor getting weak and needs

...fan motor shaft and may be striking the fan shroud or rattling on the motor shaft A loose fan blade cause elevated temps. If the fan blade is loose, replace it, not repair it, to avoid further ...

...motor/fan? We have a Hotpoint two door, side by side refrigerator, model HSM25GFRFSA. It has begun to emit a high pitched whirring noise from the fan?/motor? on the freezer side. If I turn the ice ...

...thoughts? It's seems to be coming from the freezer section your fan motor fan blade in the freezer unit is clipping ice or it is cracked and spinning on the motor shaft just get a new fan motor ...

fan motor issue? could be the bord but my bet is its the fan motor,,,it has a short in it,,,try unhooking the fan motor from the bord and switching it on, if the bord stayes switched on,,, its the fan

...working as it should. The fan motor is obviously faulty, the only real solution is to fit a new fan, if you do not, then the element is in danger of burning out, do not delay replacing the fan

...fan motor with WD-40 -- everywhere you can reach -- then plugging it back in. you have to change out the fan motor. part number WR60X10185  and it's around 55 dollars.unplug the fridge,pull ...

...fan motor?? I don't want to pay $100 for a fan motor to find that the circuit board caused the fan motor problem... How would I check the circuit board and where is it located?? Thanks.. Jack ...