Questions & Answers for: Fisher and Paykel fan cover

...cover inside the fridge, it appears that the small 12v fan isn't working. should this fan always be spinning? is it a malfunction that would lead to the fridge only being cool and not cold? the ...

...heating. Both light and fan are working. If fan is working o/k then it is usually the oven element that is faulty, this should be located at the rear of the oven compartment behind a removeable

...cover of frezzer off and removed fan,tested fan across 5v ph charger fan works,could this be a faulty defrost element (frezzer) HI,CHECK FOR CONTINUITY ON THE DEFROST ELEMENT AND B-METAL IF THOSE ...

...out of the wall and remove the back cover then its normally just 3 screws and the nut on the inside of the oven that holds the fan blade on (which is reverse threaded by the way) and it should come ...

...cover and polystyrene insulation. 5. Using 2 fingers, withdraw the fan motor upwards. It is mounted horizontally in the divider partition. 6. With the motor out, this will expose a small multi plug ...

...cover and polystyrene insulation. 5. Using 2 fingers, withdraw the fan motor upwards. It is mounted horizontally in the divider partition. 6. With the motor out, this will expose a small multi plug ...

...cover to access components. Rear right corner there is an exhaust fan assembly (vent fan) with two lead wires: one red the other blue. The blue one came off. From what I can tell it connects to the ...

...cover to access components. Rear right corner there is an exhaust fan assembly (vent fan) with two lead wires: one red the other blue. The blue one came off. From what I can tell it connects to the ...

...cover to access components. Rear right corner there is an exhaust fan assembly (vent fan) with two lead wires: one red the other blue. The blue one came off. From what I can tell it connects to the ...