Questions & Answers for: Minolta faded prints

prints faded copies, I have changed all toner cartridges, transfer belt unit etc but still copies are faded. It flashed a reference to something to do with a toner rack but I'm unable to get this this

...with the new toner cartridge.... Hope that helps.......... it is because of the moisture.it gives faded copies .this is a very common problem reffered by many of my customer .the simple solution is ...

KM Magicolor 2300 image faded We have had a Magicolor 2300DL for at least 6 years and it started to print very light images recently. It doesn't need toner or a new drum unit (at least no message is ...

...The installation seemed fairly simple yet our printing is really bad. All ink levels are fine but color prints extremely faded and not mixing well. Suggestions anyone? transfer roller req

The output print jobs are coming out half done. The Left half of the page is clear and then it fades out to the right side where the right side is not visible. Maybe out of toner. How high is your ...

...faded, as if the print was washed out looking, after a bit of research I removed the Transfer Belt and cleaned it with ISOPROPYL ALCOHOL (it's almost 100% alcohol), replaced the same transfer belt ...

...again...next page fine.....now printing with two wide light streaks down left side of page look faded and can barely read????? The is blocked by dust on the side of the paper on the image unit ...

uneven printing faded on right have checked green levers they are ok Could do with a bit more information is it an all colours or just one colour. It might be the fuser which is the heat rollers at ...

my Konica Minolta Magicolor 2350 printing is faded even though a nice image is in the transfer belt and OPC drum; at the end of each printing gives paper jam on transfer error-please help! it sounds ...