Questions & Answers for: factory carb settings

the spark plug gap for a 2001 RM125and how do i set my carb for 3000 feet it is set for 700 feet right now Set the gap at .30. No carb adjustment is needed. The factory range is sea level to 5000 feet

...factory carb settings for this bike ? Turn the air screw and throttle screw all the way inward until they LIGHTLY seat. Now open each of them one and one half turns. That is the factory setting. ...

...to know what the factory carb set up is, or any tips on setting up the carb Once high end needle is screwed fully in you can u twist screw 3 full complete turns and then wind more in as youre

factory settings for the carbs on a ZZR400. I am having trouble getting the bike to run/idle properly. Generally all carbs from the factory have a mixture screw setting of between 1 1/4 and 1 1/2 turn

...factory carb settings cleaned carb can't get the jets back to factory. can you please tell me its a 1982 jonsered 920 basic settings for this saw would be one turn out on both screws, these are base ...

...factory carb setting for a pp3516avx The factory uses tachometers to set the carb and should be used to adjust if needed. To get the unit in the ball park you can lightly seat the "L" needle and turn ...

...had it running but bogs out when i gas on it cleaned carb n new plugs fuel lines repaired some wires mice got Set the carb back to factory settings could be too much fuel flow when throttle is ...

...factory carb settings on this saw Adjustment and Tuning of a Chainsaw Carburetor ' Chainsawr store.chainsawr.com/.../tuning.../1126042-adjustment-and-tuning-of-a-c... Carburetor Adjustment for ...

...factory carb settings are for an aeon mini kolt 50cc. Having problems with getting it started, changed spark plug and battery Two-Stroke Scooter / ATV Carburetor Settings And ... ? 4:37 ...

...Carb is factory set which isn't my idea of a durable system. You can clean the carb thoroughly, blow out all ports with high pressure air and replace any gaskets and diaphragms. Then cross your ...