Questions & Answers for: Kodak EasyShare face up or face down

scanning I cannot scan an item even with your basic instruction from the manual Help- please be specific just have to put the item on top of the scanner glass with the image facing down then press the

My camera fell down ,after that i am facing the problem of lence auto in and out system when i switch on the camera. you have jammed the lense or broken the motor works in the camera What can I do to ...

calibration not working I have an EasyShare 5500 that will print the calibration sheet, however it will not scan and align, it just keeps saying that calibration page not detected.. What do I do? It ...

...face down in the right front corner of the scanner glass. 3 Press Scan. 4 Press Start. The original is scanned and saved to a file on your computer according to the scan settings in the Kodak Home ...

...face down? if using the feeder probably face up as it will likely pull the document in and invert it to lay face down on the scanning glass. if you lift up the feeder (like lifting the top of a copy ...

Won't turn on. . Lense appears to be jammed Won't turn all the way on lense is stuck somehow throw it on your bed lens face down 3 times and 1 time faced up to release the lens lock.

...don't put camera down face to the floor when opening. Else your camera need to be disassembled to get at the focusing ring at Service Center. Thanks for using fixya, Good luck and have a nice

face down on the floor, ideally a carpet. With the camera OFF, lens face down with the carpet, switch the camera on. It will take a number of go's to release the **** stuck in it. Mine took atleast 15

...face book .. but today the camara will not down load my newest pictures or share I've not had this problem but found Kodak's online chat to be helpful. Go to kodak.com and select chat or email your ...

...down! There may be several reasons. 1. Is the SD card the right size? Check to confirm your card is the right size for the camera. 2. Make sure you face the card the right way. If you try inserting ...