Questions & Answers for: IBM f7 display

F7 key combination for switching a display output location, start Presentation Director, and change the settings." "Switch a display output location v External monitor (CRT display) v Computer display

F7 and it will route the display from your screen to the output. If you press Fn + F7 again, it may route the display to both the screen and the TV. Thanks and please remember to give this a thumbs up

...F7 is enabled to cycle between LCD and TV. If it still doesn't work and you see the blank desktop, go again in Display Properties, choose LCD as Primary Display, select Secondary, and verify that ...

with F7. The functions work fine but no display indicators. What is missing? since it;s refrubished...cant say what's missing... but my guess is it's not properly formated and XP is loaded correctly..

...display(which is the reason you have to hit FN +F7) you may set your resolution higher than your laptop can be handle, try set the lower resolution ration, like 800 x 600/ 1024 x 768................ ...

...display on desktop monitor only displays on laptop; pressing function and F7 doesn't work Go into the bios by pressing delete at post and look for a setting for your display and enable it to both not ...

...F7 and select a display-switching function in the Initial setup window. Since in Windows 2000 and Windows XP multiple users can log on to a single operating system by using different user IDs, each ...

...display after turning on F7 IBM T43 ThinkPad I am trying to set up external screen, but I lose my laptop screen when using the F7 function. I need to be able to see my screen ,as well as what we are ...

...F7" keys again to display screen contents only on the laptop LCD. choose support you need http://www-307.ibm.com/pc/support/site.wss/MIGR-54305.html ...

...tap once on the F7 key. The F7 key is the Display Toggle-Over key. Still no? Hold the Fn key down again, and tap once more on the F7 key. If still no check the settings on the TV. Regards, ...