Questions & Answers for: f7 10 Microwave Ovens

...F7 Power to magnetron interrupted 1. Check the door, hinge and cavity front alignment. Adjust as needed. 2. Check the operation of all interlock switches. 3. To check the over-temperature protection ...

...F7 Power to magnetron interrupted 1. Check the door, hinge and cavity front alignment. Adjust as needed. 2. Check the operation of all interlock switches. 3. To check the over-temperature protection ...

...10 minutes later didn't work. Fan and light work. Touch pad lights up when door opened or fan or light turned on but doesn't respond to touch. ut the tech sheet did mention that intermittent F7 ...

...F7 error code: 1. Unplug microwave oven or disconnect power. 2. After 40 seconds, check to see whether this solves the problem. 3. Unplug microwave oven or disconnect power. 4. Check cooling fan ...

...F7 on our Whirlpool g2microven mean? Hi rongoin, This error occurred if you have a stuck function key on ERC. This can only be resolved if you will replace control board (also called ERC or clock). ...

...F7 from a Ktchenaid oven means that the function key is stuck on ERC. This can be fixed by having the control board (also called ERC or clock) be replaced.You may contact Sears for the replacement ...

...F7 means that you have a function key stuck on ERC. You can solve this issue by replacing control board (also called ERC or clock). You may contact Sears for the replacement part at 1-800-252-1698; ...

...F7 on KitchenAid microwave is about a function key that is stuck on ERC. You will have to Replace control board (also called ERC or clock) to fix the problem. In case you will have to buy a ...

...F7 error code that you have on your display is all about the function key stuck on ERC. The only way to resolve this is to replace control board (also called ERC or clock). You may contact Sears for ...

...F7 indicates that power to the magnetron was interrupted. You will want to make the following checks: 1. Unplug microwave oven or disconnect power. 2. After 40 seconds, check to see whether this ...