Questions & Answers for: Whirlpool f7 10

...F7 Power to magnetron interrupted 1. Check the door, hinge and cavity front alignment. Adjust as needed. 2. Check the operation of all interlock switches. 3. To check the over-temperature protection ...

...F7 Power to magnetron interrupted 1. Check the door, hinge and cavity front alignment. Adjust as needed. 2. Check the operation of all interlock switches. 3. To check the over-temperature protection ...

...F7 on our Whirlpool g2microven mean? Hi rongoin, This error occurred if you have a stuck function key on ERC. This can only be resolved if you will replace control board (also called ERC or clock). ...

...F7 or F70 unsure due to unplugging the washer . Plugged washer back in and no lighting on the controls at all . It only beeps when pushing the power button . Purchase date of 10/21/09 .From Lowes No ...

...F7 means that you have a function key stuck on ERC. You can solve this issue by replacing control board (also called ERC or clock). You may contact Sears for the replacement part at 1-800-252-1698; ...

...F7 error code that you have on your display is all about the function key stuck on ERC. The only way to resolve this is to replace control board (also called ERC or clock). You may contact Sears for ...

...F7 Power to magnetron interrupted1. Unplug microwave oven or disconnect power.2. After 40 seconds, check to see whether this solves the problem.3. Unplug microwave oven or disconnect power.4. Check ...

...F7 or 7 times flashing Flow meter failure Symptom: Water inlet valve (WV1) is switched on and the water indicator (WI) is on (level reached). Reason: Water tap closed during water inlet Water inlet ...

...F7 - Flow meter failure Water inlet valve (WVI) is switched on and water indicator (WI) is on (full). Flow meter (FM) sends too few impulses (less than 10 imp. in 10 sec.). Water tap closed during ...

F7 - Flow-meter failure Symptom: water inlet valve (WV1) is switched on and the water indicator (WI) is on (level reached). Could be: 1. Water tap closed during water inlet 2. Water inlet hose blocked