...microwave Keypad display shows -F2-. Unplug unit for 20 minutes or so and microwave will work fine for a short time. Keypad display then goes back to -F2-. If this has a controller that runs a ...
Question about 63792 Microwave Oven
...microwave displays an F2 error message. Can you tell me what this means? The F2 error code on your microwave oven is a membrane failure. It is recommended that you replace the membrane first & if ...
Question about KHMS155LSS 1000 Watts Microwave Oven
microwave is beeping, lock comes on, F2, just keeps beeping by itself F2 on a KitchenAid mike usually means a Keypad short. Beware if it is a KHMS155LSS, it can self start on its own with a KeyPad ...
...F2 on a Whirlpool microwave means you have a shorted membrane keypad. If and when an oven is coming on or doing anything by itself, this is very dangerous and can result in a fire. So until it is ...
...mean? F2 on a Whirlpool microwave means you have a shorted membrane keypad. If and when an oven is coming on or doing anything by itself, this is very dangerous and can result in a fire. So until it ...
...F2 mean? The error code F2 on your GE microwave indicates "Shorted thermal sensor", this condition will occur if a shorted thermal sensor is detected continuously over 5 seconds on convection, ...
...F2 what does that mean It is a bad keyboard error code. Try this, unplugg the unit, open the control panel and disconnect the ribbon cable from the control board, plugg back in, if F2 comes back on ...
...f2 mean on the display The "F2" on a microwave can mean that the touch pad has a problem. Once I saw that message on a stove. The technician told me to press the "stop/cancel" button two times to ...
my ranger digital pannel have a message EO F2, what ir means..?? the brand is Kitchenaid Is it E0 F2 or F2-E0? If it is a 4 digit panel and it shows F2-E0, then it is a shorted keypad and you have to ...
F2 Microwave hood combo Per the tech sheets (page 8), "F2" error code means "Keyboard failure". Recommended by the manufacturer to replace the touch panel first and, if it would not solve the problem,
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions
