Questions & Answers for: Sears LiftMaster eye problems

...clicks, the motor attempts to move very slightly. starting capacitor is new. SOUNDS LIKE A SAFETY EYE PROBLEM. WILL IT CLOSE IF YOU HOLD DOWN THE WALL BUTTON?? HOLDING DOWN THE WALL BUTTON

sears craftsman garage door opener door will not close with remotes or pad unless i hold down the close button until it is shut. the light just blinks otherwise. nothing blocking sensors. HOLDING DOWN

...sensor...check wires ASSUMING THEY ARE AIMED CORRECTELY-- YOU MAY HAVE A BROKEN WIRE TO THE SAFETY EYE OR A BAD SAFETY EYE. TRY RUNNING A TEMPORARY WIRE DIRECT TO BYPASS THE ORIGINAL IF THIS SOLVES ...

garage door The garage door will not shut automatically. It will go down so far and then stop. TRY THE DOOR MANUALLY AND RUN THE OPENER DISCONNECTED FROM THE DOOR(WITH DOOR IN CLOSED POSITION). THIS ...

problems with a garage door opener: PE's dont work, I think it is not set up. I need to program auto close The door is new and not set up properly. The reciever board has 2 x 8 dip switches It has the

...but comes up like there is something in the way but there is nothing in the way Check your safety eyes. There should be a light on on each eye. If not, align the eyes so that they are pointing ...

...it blinks 10 times. It'll only go all the way down if you hold it down until it shuts. Your safety eyes are out of ajustment. Make sure that the eyes are pointing directly at each other. A light

Liftmaster security+ garage opener opens okay and refuses to close with remotes. Makes clicking sound. HOLDING DOWN THE WALL BUTTON OVERRIDES THE SAFETY EYES. WHEN HOLDING IT DOWN MAKES THE DOOR CLOSE

Sensors don't function, placed eye to eye the down will not work. Checked the connections, ok. The lights on the sensors do not work, is this a circuit board problem? Yes you have a bad logic board.

I just replaced my Sears garage door opener logic board. I suspect the safety eye has failed. How do I check the eye? The original symptoms was the power unit reversing when attempting to close.The ...