Questions & Answers for: Stanley extension cord

how to recharge stanley 450 amp jump starter There is a male 120V plug on it that you connect an extension cord to.

...like it needs a new start capacitor for the motor and never use a extension cord plug it directly into the outlet and use longer air hose.using extension cords for a air compressor is bad for the ...

...extension cord that was too long and wouldnt allow enugh power to run the compressor it only made a noise like it was trying to run ,so i quickly disconnected the extension cord and bought a heavy ...

...looks like the male end of an electrical plug in an odd place. Get an extension cord and place the female end over that male end and plug the male end of the extension cord it into the wall

...extension cord. It has to be the air compressor itself It is not uncommon for these compressor motors to "burn up".  They are especially prone to overheating if a 14g or 16g extension cord ...

Problem with Bostitch CWC200ST. This unit has never ran correct. Using no extension cords, plugged directly into receptacle w/ 20 amp breaker, said unit starts fine, trips reset thermal switch usually

...of us enjoyed it. So change your mind, and embrace the holidays with giving and cheer. Unplug extension cords before working on lights, to avoid electrical shock. Gene I'm the timer expert... ...

...extension cord FOR 40 hours before using. You cannot overcharge the unit using the AC charging method. • To recharge this unit, use only the supplied AC charging adapter. • All ON/OFF switches should ...

extension cord? The time-it can be plugged into extension cord. Often the manufacturer wants direct plug into wall to prevent problems caused by extension cord, such as power loss and loose connection

do I plug my stanley fatmax 450 with air compressor to house hold outlet to charge it or what? Yes. Unless one was provided the standard is to just use an extension cord.