Questions & Answers for: example of pulley

...remove. There is special ps pulley puller. Should be the same as a car. Can either buy or rent one. Here is an example: ...

...pulley's for proper alignment . Example If you change your original alternator with a after market one , they often come different spacer and pulley. Also if you change power steering pump the pulley ...

...pulley while you loosen the bolt : Here is an example of one that I used on a Honda: http://www.ttnet.net/ttnet/gotoprd////0535051303034383933343.htm Often , auto parts stores have a "loan a tool" ...

pulley for free movement when the car is off. For example, if there is an air pump, it should turn freely. Or, if the alternator pulley is disconnected from the belt, it should turn relatively freely.

...example: What pulley are you referring to about moving freely? There is what's called an idler pulley that retains the tension on the belt at all times and is the pulley you should have used to ...

...pulley in this example.2) starting from the crankshaft, go along the bottom of the pulley towards the left of the engine face to the next pulley, if that pulley is smooth on the round part, then that ...

...alignment. If one, for example the power steering pump pulley is out of line, not only will it continue to tear up belts, but could potentially damage the power steering pump as well. Hope this

...siezed can I fit a shorter belt for a non aircon model and bypass my aircon? there are numerous examples of fords with out ac but to be precise you will have to give the year and engine type. ...

example of adjusting transmission rods. Thank You Bill Hi Bill: You did not mention make or model, so I'm going to make this suggestion. Check the drive pulley. Not the deck pulley, but the one that's

...pulley make a note of that length (B) now take A from B and reduce the original belt length by that amount example -- if the original belt is 1485 mm long and the difference is 145 mm then you would ...