Questions & Answers for: evesham televisions problems

...but just the same.connected them back up,tried dvd then video tape no picture but sound,its a evesham 32" lcd tv my 2nd in 3 months although the first was a dfferent fault,please help save my ...

V27DMCX-ZE 27 inch Evesham LCD TV. Bought Feb 2006. The Power light does not come on . I have changed the fuse in the plug. but it still does not work. There may be a fault in the power board, ...

Evesham badged - UK) will not power up. TV failed after three years. When external power is switched on or off there is a faint momentary sound from the speakers but tv will not switch on. The standby

Evesham 32in LCD not working My Evesham 32in LCD TV has stopped working, there is power going to the TV as I hear a very quiet buzz which lasts for a few seconds. I have no picture or light to say ...

my evesham tv wont come on/ it appears to come on but few lights flash then it knocks straight back off We had this problem, everytime we switched it off at the main plug, so when we could, we would ...

I powered down my Evesham TV and now it's appears dead. I have checked and change the fuse but to no avail. Any suggestions? I understand this may be a common problem with Evesham TVs Unplug the ...

i have an 32" lcd i have an 32" lcd flat screen,make evesham ,model v32mcgi, that is showing no picture but has sound any ideas on what the fault could be , many thanks eddie. if your TV unit is ...

Hi my evesham tv is flicking on and off on standbt and im getting no picture at all. this has been happening for a few weeks now but it eventually comes on but this time its been doing it for about 4 ...

Evesham tv buzzing buzzing on sound when conected through scarts or built in freeview May be a audio problem but if only a DVD player (nothing else) is connected do you have the same problem? 

how can i reset evesham alqemi 37 vx The TV turns on but The image on screen is solarised. Can I reset the graphix or is a card problem ?, any help would be good. To make it a hard reset, just unplug ...