...top thread gets stuck in the bobbin area, It was sewing fine and then it freezes up and the thread is cought in the bobbin ares. Please help me with this problem. I have a suit jacket and vest needed ...
...euro-pro 9120. Have rethreaded and removed and replaced bobbin several times but problem continues. HELP!!! Loose bottom stitches mean the UPPER tension has a problem. Pull the thread through the ...
Question about 8260 Mechanical Sewing Machine
...setting... tension even at 0. [email protected]. this problem is driving me insane.... never had this problem with a brother or a singer but this euro pro is about to go through a window! Any
Question about 9120 Computerized Sewing Machine
Euro Pro. It was I have a Shark Intelli Sew 9110 Euro Pro. It was working fine and then my bobbin thread became tangled. I cleaned it out and now my needle goes down and then jams and it will not come
Top thread gets stuck around bobbin case I am attempting to thread my machine but whenever I try to drawup the bobbin thread, the needle thread gets stuck around the bobbin case and won't come back up
Top thread gets stuck around bottom bobbin and jams machine I've had this machine for about six months, and haven't had any problems with it up until now. It will stitch a few stitches, and then jam. ...
...top thread keeps getting stuck on the bottom. It's not the bobbin thread that does it but the top thread which gets caught on the hook below. I've rethreaded both top and bobbins and I've cleaned and ...
...on the foot control but you get a buzzing sound from the motor, then, either the btakeup lever is at the top holding the machine back or you have a small piece of thread stuck in the bobbin case
Question about 9120 Computerized Sewing Machine
...Euro-Pro 9120 I've taken the machine as far apart as I can with the manual and there doesn't seem to be anything stuck in it. It won't run forward, It goes half a stitch and ...
Question about 9120 Computerized Sewing Machine
...Euro Pro 7500; wheel won't turn, needle won't go down. getting power. I think something is stuck in the top part. How do I remove the housing. I removed the one screw but the presser foot pressure ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions