Questions & Answers for: eureka belt slips

...belt Hey I have a Eureka 2961 avz bagless vacuum, and if it's on for a few minutes i can smell the belt burning. If the vacuum is left on any longer the belt starts smoking. I took the case off and ...

...Eureka vacuum cleaner belt keeps slipping off I need to replace the belt (part 61110a) on my Eureka 4870 series vacuum cleaner. The new one is *very* tight when I install it and after a minute or two ...

Eureka 5197 self propelled bagless upright I changed the filters and unclogged it and changed the belt. Suction is fine but it is extremely loud and smells like the belt is burning? How do I fix? Did ...

...belt on a Eureka "Boss." Much like a toilet paper dispenser, the motor shaft pully sits in a plastic channel, turning in place on two pegs. I can't squeeze the belt past these pegs. Any suggestions ...

...the belt you need. Eureka Altima Owner's Guide Eureka Altima Replacement Belts I agree, your belt is worn and has stretched, so the motor is unable to spin the brush roll. It is a cheap and easy

...new eureka vacuum broke the belt I replaced it no problems Now it has very low suction. Belt is okay, brush is turning but not really picking up anything. Is the belt slipping. Are all the seals ...

...belt on my used Eureka Boss 5857 upright slips off the end of the motor shaft every time the vacuum is used. When I turn the brush roll slowly by hand, the belt walks toward the end of the shaft. It ...

Eureka maxima vacuum smokes and smells like rubber burning..whats wrong with it..the brush turns but seems like its blowing outwards too when you get a burning rubber smell, the drive belt is usually ...

belt keeps slipping off motor shaft belt keeps slipping off motor shaft The belt may be stretched or worn unevenly.

Eureka Model AS1104. When I engage roller, it goes and stops when I'm pushing it to Vacuum. Belt Maybe?? Yes it is likely to be the belt, they stretch, go thin and then slip, create heat and get worse