Question about Konica Minolta Office Equipment & Supplies
...error m2 appear on display Hi You can reset (M2) by reset clear data Enter to service mode By Pressing : Utility - clear -0 - 0 - clear -0 - 1 Press ADJUST Press CLEAR DATA Turn OFF Copier and Switch ...
...M2 turns OFF. At this time, an error detection signal (24V cut out) is detected.
Causes:
Drum motor (M2) Blade motor (M14) Printer control board (PRCB) Blade sensor /1 (PS30) Blade sensor /2 ...
Question about Konica Minolta Office Equipment & Supplies
konika minolta bizhub 215 error code m2 how to remove error code M2 You need to go into the service mode and then reset the supplies life counter.
stop work with error m2 in 164 machine error code m2 and not doing any work with machine clear the counters first then replace the drum and developer then run F8
Question about Konica Minolta Office Equipment & Supplies
...M2, M1 Call service errors.To remove this error do the following steps. 1-Press utility button on panel. 2-Now press these buttons one by one, Press Stop, then zero, again zero, then stop,then press ...
Question about PAGEPRO 1380MF All-In-One Laser Printer
BIZHUB 164 error M2 what have I to do I have problem in my machine Konica Minolta bizhub 164 error code m2 plz tell me how to reset. Thank you replace the drum and developer and then reset the counter
Question about PAGEPRO 1380MF All-In-One Laser Printer
...error M2 what have I to do I have problem in my machine Konica Minolta 164 error code m2 plz tell me the solution. thank-you [email protected] Replace the developer and the drum make sure ...
Question about PAGEPRO 1380MF All-In-One Laser Printer
...message error M2 appel maintenance M2 / maintenance call M2 http://www.copytechnet.com/forums/konica-minolta/62595-konika-minolta-bizhub-163-error-code-m2.html THEN CHANGE THE DRUM UNIT OR ...
Error for Mintenance call m2 this printer is not key numper not fesility M2 means Time to replace your consumables (drum,developer,cleaning blade,drum charge assy & cleaning pad) after replacement
Question about PAGEPRO 1380MF All-In-One Laser Printer
plzz help me konica minolta bizhub 195 error code M2 i change developer see if this link helps you out... konica minolta bizhub 195 error code M2 Google Search
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions