Questions & Answers for: Konica Minolta error 34

code How to reset error code F-34-1 on Konica 7030 printer try to change the thermistor, if u confirm both the heater lamps is working. the fuser unit from 7022 is not compatible with the 7020 machine

error code F-34-1 in konica 7055 Hello sir; You need to reset, the procedure as follow; power off the machine, hold down 2 & 5 while you power on machine,then chose 1 soft switch setting, then dip

service call co25 controller rom error service call co25 controller rom que significa service call co25 controller rom

...error code F-34-3 konica 7040 COPIER SHOWING ERROR CODE F-34-3 Friend, this code refers to short-circuit the corona separation and transfer, check for accumulation of toner and do a cleanup in the ...

What are codes F-34 and F-35? These are heat sensor abnormality error codes in Konica Minolta 7222/7145/7135/7235/7228 models.You did not mention the model.

Fuser error 0500 fuser erro 0500 what to do, cannot print. replace the fusing unit Precision Roller Printer Toner Cartridges Parts and Supplies Office...

Service Call (FFFF) what do I do when my printer says Service Call (FFFF)? Communication error between the to circuit boards inside the n]machine. Check all connection remove and reseat all connectors

error sc 34-02 what errer SC 34-02 model###########################3

error message service call 0050 fuser error Need a new fusing unit. just this place for a start Precision Roller Printer Toner Cartridges Parts and Supplies Office...

error code and all my machine says is Trouble reset, with an arrow pointing down to ok. Nothing else is happening that is GOOD did you touch the trouble reset, yes then power off and turn on should be