...battery contacts with an eraser, but with no success. The speedlight isn't even two years old and is stored in a safe container. I am stumped. are the contacts corroded or bent? Almost exact same ...
...with this problem often. Try using an ink eraser to clean the contacts in the camera. Use an old style ink pen with one of those white erasers on the end. Easier to insert in the battery
...eraser. Do it for the contacts inside the battery casing as well. Be sure to blow all the eraser rubbings out of the inside case and clean then off the battery contacts. Put the battery back inside ...
Question about Coolpix S210 Digital Camera
...battery and clean the contacts with a pencil eraser, then wipe all the eraser dust off and try it. It could also be that the battery isn't holding a charge because it's worn out. They don't last ...
...battery problem. Two suggestions: 1) With a WHITE eraser (preferably at the end of a pencil) rub the metal tabs in the camera that makes contact with the batteries. They may be slightly corroded. ...
...a minute. hello. Remove the battery and clean the battery contact spots with the eraser end of a common pencil. Also clean the ends of the batteries. Then reinstall batteries and test it. Regards, ...
Question about Coolpix 4600 Digital Camera
it says battery is exhusted but the batteries are good what gives Try cleaning the battery contacts in the camera with a pencil eraser and then with a cotton swab lightly dampened with rubbing alcohol
...and corrodes contacts in the battery compartment on the Nikon SB 600 speed light. How do I clean them? If its not that bad , use a pencil with eraser better yet an ink eraser and rub the ...
Question about Speedlight SB-600 TTL Flash
...battery connection but not the camera connections. This is why it is very important to take out batteries when you are done taking photos. When you want to shoot again you put the batteries back in ...
Question about COOLPIX L820 Digital Camera Black
...eraser on the contact. Many times the contacts will become dirty and not allow the batteries to make contact. Also do the same to the battery contacts. Additionally, check the spring tension on the ...
Usually answered in minutes!
671 Questions
698 Questions
616 Questions
581 Questions
504 Questions