brother sx-400 eraser not working my typewriter is a brother sx-400 I was trying to fix my eraser but for some reason it's not working. the tape isnot on reverse and the spools are on place on each ...
...tape housing. Then when you hit the erase key, see if the cam on the inside (looking through the small holes in the correction tape housing) turns and pushes up this housing? It may be the tab in the ...
tape CORRECTLY but it will not erase the mistakes. When I test it I can see that it is in the right way but the erroneous text is still there. HELP! either; 1. you have a non-correctable film ribbon,
...erase. Please help. If I do need new corrective tape do you have any idea of the cost? Thanks Be sure the tape is installed with the dull side facing the platen. The tapes are readly available but be ...
When I press the "correct" button, nothing erases. How do I fix this? If the T/W is going thru the lift off movements the correction tape may be installed with the wrong side towards the paper. Dull ...
...erase the letter. I'm using a model#1031 film ribbon and a model#3010 correction tape. According to the user guide, these are recommended and I've followed the guide directions on replacing the ...
...tape will not erase, nor will it rotate to more tape. There is sufficient tape on the roll. Thank you do you have it past the leader ( the red part)? there is a sticky place just before the actual ...
...Tape.thent install the cartridge in the printer again.after install the cartridge press SECURE PRINT AND CANCEL BUTTON SAME TIME AND CLEAR THE STR AND STD FOR PRESSING ok BUTTON FOR 2 TIME.ERASE EACH ...
CAN ONE USE A RIBBON WITHOUT THE ERASER IN A BROTHER TYPEWRITER GX6750? Yes you can, the correction tape is not needed to type.
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions