Questions & Answers for: equinox hub torque

...Equinox. Hub bolts are around 65-70 foot pounds, axle nut is about 120-130 ft pounds. These are not super-critical. Many at shops are installed using air guns and work just fine. Your main objective ...

...equinox. code light shows left hub defective, replaced howevere after driving 20 miles the abs and traction control warning light come on. Have rechecked conection of hub and torque of same. CHECK ...

equinox You will have to purchase a new/rebuilt CV axle. The axle is held in place at the hub (wheel) with a large nut that is put on with a lot of torque. If ti is "staked" then you will have to lift

...hub in a 2006 Equinox Need GM's torque specs to replace front wheel bearing hub. I need the torque setting for the axel nut and the setting for the three bolts that fasten the bearing hub ...

...equinox. Replaced pads and rotors. Have a grinding/squeaking, horrible sound only when applying the brakes lightly. You can get guide from many sites.. i know few error codes/ fault codes, wiring ...

...hub 2006 equinox You can google that, and get torque specs on every bolt on that car! My database showed 157 ft lbs for hub nut. 151 ft lbs should work just fine. I didn't see the other answer before ...

...torque specification and the sequencing is as follows: 1. Brake caliper bracket bolt (front): 190 N.m. , 140 Lb-ft 2. Hub to axle shaft nut: 205 N.m., 157 Lb-ft 3. Hub to knuckle Bolts: 100 N.m., 74 ...

hub bearing torque specs for 2005 equinox The 3 bolts that hold the hub to the spindle torque specs are 96 ft lbs. The CV shaft nut is 118 ft lbs. The caliper bracket bolts should be torqued to 137 ft

...hub on a 2006 equinox You should go to www.reliable-store.com they have got books on every vehicle and also how to service/repair it, service/repair/owner's/maintenance manual with parts info, fuse ...