Questions & Answers for: enter simulation sharp ar 5316

...enter simulation by presssing #,interrupt,c,interrupt in sequence display is then off, then no. 14 then start key h2 disappears ok It worked thanks alot.All I did was to press the ...

"d" display on AR-5316 When the unit is switch on "d" is displayed on the LED display and it seems to lock all keys and simulation can be entered. Any solution to this problem? ghgfh

...press#-interupt-c-interupt.now disply goes to off. now press14 then press start button enter simulation mode and input 14and the press the start button. Heat roller abnormally low

...simulation? how can i enter into the sharp copier process? i have problem and the code is L1-00 so can you give me the solution To enter the simulation mode. "#" key Interrupt key "C" key Interrupt ...

sharp copier simulation program how to do it? sharp copier AR5316 how to enter simulation program? and change destination setting europe to asia? thanks...! I answered it right now

...door) are closed.#Kintu Dennis Kentus It is a fuser error code. You have to go to simulation mode( same as sharp 5316 ) and than you have to enter: 16 strart 1 start, than switch on and off. It is

...for work. please i also need other codes for the machine You have to check the toner gear in the end, it is not a code reset problem. enter in the simulation mode and reset with 16 start 1 CA

...working, please help. Sorry for my language. Perform the following procedure to enter the simulation mode. "#" key Interrupt key "C" key Interrupt key press 16 and start key twice Hope it helps, ...

...enter in the simulation mode for a sharp AR-5316 digital photocopier and change the settings Try pressing #, *, C, *, to get into the simulation mode. To change user settings, try the menu feature. ...

i have Sharp Copier AR-5516S i have a problem which indicates H4 code error & can not photocopy needed quickly solution please help me fuser problem /enter simulation # 14