Sony 62" Grand Vega HD TV 1. Red LED flashing on TV, book says needs servicing. 2. Try turn tv on switches over to green LED 5, or 6 times, then goes right back to red flashing LED. 3. I pulled the ...
...enter service mode What is the service code to enter '' service mode '' on Phillips and Panasonic televisions? I have a Sony (wega) KD-32DX200U. Please how do i get into screen mode. I'm trying to ...
Question about Grand WEGA KF60WE610 60" Rear Projection Television
...sony grand vega kf60we610 isn't turning on... the light is blinking 6 times red... can u help? You likely have an open thermal fuse. There is a whole procedure for replacing the thermal fuse and some ...
Sony Vega Service Codes When I turn my Sony Vega Model KV-32HS510 tv on, the standby light blinks seven times, pauses then blinks seven times again. Could you tell me what needs servicing??? Sony FD ...
SONY 62 LCD GRAND VEGA HD TV try turn tv on switces over the green led 5 or 6 time;then goes right back to red flashing led A three flash means you have not seated the lamp cover correctly. Try ...
...Sony Grand Vega.. will not power up. Green light on for 2-3 seconds with a screeching noise and then the red light comes on and blinks 7 times. i have tried a new lamp You probably need to get the ...
Sony Grand Vega My TV has blue bleeding at the lower left corner. It's present on all channels. try adjusting the convergence settings
Question about Grand WEGA KDF-42WE655 42" Rear Projection HDTV
...enter the DE Service menu. The TV screen will display the total lamp time hours.Reset the lamp time by pressing channel 3, then mute, then enter. This will put your lamp counter back to 0. hope it ...
Question about Grand WEGA KDF-42WE655 42" Rear Projection HDTV
...Sony Grand vega that was telling to replace lamps for a while. Last night I shut TV down and went to sleep. THis morning turned it back on and --Green light flashes for a few moments --Then red light ...
Question about Grand WEGA KDF-42WE655 42" Rear Projection HDTV
...Sony Grand Vega rear projection TV and the "replace bulb" warning light stays on. WTF? You need to reset the lamp timer, this location should be in the owners manual. If this was helpful ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions