...ENTER] button on the remote control. Arrow to the Sound Menu option and press the [ENTER] button on the remote control. Arrow to Speaker Set and press the [ENTER] button on the remote control. Arrow ...
Question about RAV-300 Remote Control
let me know! To program it, you need to hold down the AV button and the DTV/CBL button for 5 seconds, then enter your 4 digit code. Once you've entered the code, test the remote by using the TV button
...Enter" button (green letters) 5. Press "TV VOL" button (green letters) until "3 Option Menu" is displayed on receiver 6. Press "Enter" button (green letters) 7. Press "TV VOL" button (green letters) ...
Question about RX-V463 Receiver
...ENTER button. Always press AMP first when selecting menu, enter, any surround mode, or one of the amp functions in ORANGE above the green numeric buttons. Got this from Yamaha. BG I spent about an ...
and hit the start button. If it does not crank, hit and hold the mode button again and re-enter the code you just stored. After you enter the correct code, it will now say START and you are good to go
...Enter button. 5. Arrow to the Sound Menu option and press Enter. 6. In the Sound Menu arrow to Speaker Set and press Enter. 7. Arrow to the EXTRA SP ASSIGN and select ZONE2. This may require using ...
...Use one of the 2 buttons to set the time and the other one as "enter".Then the minutes will start to blink.Same procedure and by pressing the "enter" button it will exit from the hour adjusting
...button. 4-Enter one of the following codes 30176 or 31176 5-If you entered the code correctly, the AUX key will blink twice and turn off. Now aim the remote at the receiver and press power. If the ...
...Enter Button on the remote control. 5. The Setup Menu will come up across the TV/Monitor screen. 6. Use the Arrow Left & Right buttons on the remote to navigate to Speaker. 7. Press the Arrow Down ...
...Enter button to enter Manual Setup. 6. Use the Arrow Down button to select the number 3 Option Menu. 7. Press the Enter button to enter the Option Menu 8. Use the Arrow Down button to select D Multi ...
Usually answered in minutes!
192 Questions
173 Questions
140 Questions
146 Questions
92 Questions