Questions & Answers for: enough light under microwave

...light bulb separating from the metal base when trying to change the bulbs under my G.E. Spacemaker Microwave.. I see someone used a carrot or potato but I had not seen this suggestion before I ...

light bulbs can be had from common sources such as department stores, home improvement stores, and hardware stores. Of course, I don't know much about what you'd call those places "down under and over

...enough, so put it in for 1 more minute. When I closed the door to start that last minute, everything was off. No lights, no nothing? Any ideas? Is there a reset? The first thing to try is a "hard ...

light from my GE Eterna Model Em0300 under the cabinet microwave and the bulb broke off in the socket. How do they remove the rest of the broken bulb parts. I believe it is the metal part of the bulb?

...enough light. Do you have any suggestions outside of replacing the whole microwave? I wish I could find one that is magnetized, due to the fact that the bottom of the microwave is metal. Thank you. ...

...light out and sure enough, OSRAM 64405S.... Took me maybe 5 minutes to remove... Take care 1. Disconnect power. 2. Remove glass light cover by grasping the front edge and pulling away from oven. 3. ...

light stability but you haven't provided nearly enough information for a detailed solution. I'm sure you have enough voltage but you aren't getting enough current to run specific loads. How many watts

...light - and determined it was on same circuit as microwave. Suspect problem was not enough juice to microwave and it blew. So now I am trying to see if it was just a fuse or something I can easily ...

...enough to unlatch it and you can remove it. Your light bulb is hidden under a metal tin cover. Depress a small plastc latch in front of it and lift the cover...you light bulb is right there...good ...

...light bulb under the unit on my microwave and went to turn it on and it tripped the circuit breaker and smoked the control panel. The only fuse in the unit is still good. Any thoughts? Hi Joe, please ...