Questions & Answers for: Honda CRF 230 F engine wont turn over

Question about 2003 CRF 230 F

1 Answer

it wont idle at all c i can start it fine with the coke on but when it is started it wont idle by its self it will idle by it self like 5 mins later. its a 4 stroke cfr 230 honda 2004 Low speed carb ...

Ad

Question about 2005 CRF 230 F

1 Answer

...wont go down, do you mean engine is "stuck" If this is the case the engine is "seized" try turning engine over with a spanner on the drive sprocket. If no movement at all engine is seized.I assume ...

Ad

Question about 2003 CRF 230 F

1 Answer

dirt bike the park break is on and it wont start it keeps making a funny noise check your oil sounds like your engine maye have sezied

...engine run very lean, this can cause piston damage, suggest you modify the fuel system to deliver more fuel. take that damn baffle out!!!!!!!!!!!! and adjust your mixture needle by turning it counter ...

Question about 2005 CRF 230 F

1 Answer

...wont even attempt to turn over when i hit the button. i can on the other hand push start it. do i need a new switch If you are getting completely nothing no noises or clicks nothing then switch would ...

...it has 12 volts but wont click or turn over at all when i press starter button. You can push start it and it starts and runs fine any suggestions? Dirty contacts in starter button or loose

Question about 2005 CRF 230 F

1 Answer

turn over though. A common problem is hydraulic locking. This occurs when fuel leaks into the cylinder preventing the piston from rising in the cylinder. Pull the spark plug, cover loosely with a shop

Question about 2004 CRF 230 F

0 Answer

...wont throttle Hi, Anonymous and the usual suspects are: 1. Throttle cables misaligned or misrouted. 2. Damaged or restricted fuel tank venting system. 3. Intake system air leak. 4. Vacuum piston ...

Question about 2004 CRF 230 F

1 Answer

...goes away! Checked the oil mesh and changed the oil to no avail. Noises are very hard to locate on engines. You may have a valve lifter that bleeds down when the engine isn't running. Not a major ...

...engine will not turn. When I go to try and start my bike the starting motor cranks and turns just fine, but it will not engage the engine to start. I have replaced the spark plug and the starter ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...