Questions & Answers for: Suzuki engine turnsover wont start

engine still turning and it wont fire, i was wondering if it was the fuel pump or the filtter but i dont know were they're mounting. all the engine lights r on befor starting, please can u help me out

...wont fire.. Take one of the plugs out and hold it against the head while the engine cranks. You should get decent spark. If not, you have an ignition problem. If it gets decent spark, try spraying ...

wont start, engine turns over my bike wont start, i have replaced the spark plug, the engine did start for a few seconds, then cut out, yes, there is lots of petrol in it, any ideas ???? Did you ...

...ENGINE WONT START.BEST CODE CAN VECHICLE.IF ENGINE WONT TURN OVER.COULD BE WEAK BATTERY DUE TO ALTERNATOR FAILURE OR CRANKSHAFT POSITION SENSOR OR CAMSHAFT SENSOR FAILED.EGR VALVE STUCK OPEN.ECM HAS ...

engine wont start engine cranks over but wont start. starts if i spray starter fluid but den quickly dies. BAD FUEL PUMP, CLOGGED FUEL LINE.

...wont lock blow fuse check all fuses first with a meter. what engine? what transmissin, A/t or M/T do you mean wont crank or cranks fast and robust but will not start no a/t car starts if not

...engine wont start sure lynne what engine, there are 7 swift engines. locked, does that mean you spun engine by hand, ? nah.... ahh, the immobilizer. is set. the suzuki some have that. and that means ...

engine turns over but wont start the computer does not go to brick mode overheated. ;sorry ! what engines, the 2.0L>? J20 engine, chain twin cam 8 engines used world wide, ill guess J20.... for you

...turnsover.Anyone got any ideas? Hi, Stuart and the usual suspects are: 1. Ignition Switch not in the "ON" position. 2. Engine Run Switch in the "OFF" position. 3. Discharged battery, needs to be 12.5 ...

...wont start after replacing engine I have a 2006 suzuki forenza that i replaced the engine on with a 2007 suzuki forenza motor. few days later it started running hot so i also replaced the radiator. ...