Questions & Answers for: Yamaha YZ 250 F engine timming

gas on the tank? if is what is the scale for the mix? DO NOT mix oil in the gas on your four stroke engine. You will foul the spark plug(s), build up deposits on the valves and head, and make a smokey

Ad

Question about 2003 YZ 250 F

1 Answer

removing the front axle Cannot get the front axle out. Any tricks? I have loosened all bolts and can get the axle to move about an inch but then it stops. Don't just loosen bolts remove them cause ...

Ad

Question about 2004 YZ 250 F

1 Answer

engine oil plugs? i have a yamaha moto 4 dual range 4 wheeler. on the left engine side there is a plug on top of the transmission. curious of what liquid goes in there? right side has oil dipstick. no

Question about 2004 YZ 250 F

2 Answers

...cylinder( depending on how bad it is or get it honed) ASK A QUESTION OR GET NO HELP !!!! and its ENGINE not ...

Question about 2004 YZ 250 F

3 Answers

Engine seized? i was changing up a gear when my yz250f made a whirring sound and cut out. Tried to kick it over and kicked a couple of times then the kick start seized, any ideas what this could be? ...

How much oil do i put in a 1998 y-z125 G'day Tim. Engine(gear) oil cap is 650ml .Dont know what that is in quarts.There,s some homework for ya tim. Moochos Grassos ..Timbo..Tabbycat..Australia

...fill up the oil, and it is just straight fuel in the tank is,nt it. many thanks TREVOR Checking the engine oil couldn't be any easier. On the lower left side of the engine, by the shift lever, is a ...

2005 yz250 gear oil and engine oil are they the same stepsons dad says there is no gear oil just engine oil in the bike. all the bikes ive owned there is gear oil and engine oil . he is full of **** ...

Question about 2004 YZ 250 F

1 Answer

...to do oil change yz250f 05 oil change wich bolts to un do there is one bolt on the bottom of your engine, it should be 14mm then fill your engine with the correct amound off cc's thats required. it ...

...Or Black And White. If You Unplug These Wires From The Switch, It Should Run. The Switch Kills The Engine By GroundIng The CDI . By Unplugging The Switch You Enable The CDI ( Engine Run). Also The ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...