Questions & Answers for: Subaru Legacy engine no start

Question about 1992 Legacy

1 Answer

start my engine, it fired up.. and after moving more than 100 meters, the engine experienced malfunction like.. it started coughing up.. combustion wasn't normal already so i parked the car back, good

Ad

...advice !!! Hi, have the same problem with my 1995 legacy gt twin turbo and the problem lyes with the ecu temp switch, it sound's like the ecu thinks the engine needs more fuel to start and ...

Ad

Question about 1997 Legacy

1 Answer

...engine is flooded. It eventually start after I let it set for awhile. If you think the engine is flooded hold the gas pedal about half way down, while you try to start it. Be ready to release the ...

...does and I run engine awile it start more easily right away go to auto zone or advance auto parts they do code reading for free find out why your check engine is on before you get stuck,far from

...I start driving and then stop on the red light, after lets say 2 minutes, car's engine and car itself starts shaking. Why? Sounds like throttle position sensor is not working properly. Good luck ...

Question about 1996 Legacy

1 Answer

...start my subaru legacy 1997 2.5. A/T. It was running. I parked it. I stopped the engine then I tried to started it again but I couldn't. When I turn the key to contact, a little and permanent ...

engine won't start after hot but will after cools some 96 legacy sometimes won't start after going into store and coming out, will crank over okay. will start after a while. ENGINE FLOODING ...

Question about 2003 Legacy

1 Answer

...start this is normal. if the engine is to hot its a safety feature to prevent any damage to the engine. the engine management system controls it. let the engine cool for 30 mins then start it.check ...

91 Subaru legacy engine ignition fuse blows after engine starts Engine ignition fuse blows after engine starts find the biggest size fuse and put that in if that dont work then it sounds like a bad ...

When my 1990 subaru legacy is cold it runs good then after 10 miles it starts skipping engine light comes on and a strong ordor of gas can be smelled. it does not run hot but when it starts to cut bac

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...