Questions & Answers for: Subaru Legacy engine misfire

...engine light for misfire cylinder 2 and 4 My check engine light came on for misfire on 2 and 4. Got new plugs and wires. Day later came back on. Brought it back to the same place and he changed my ...

...hear the knocks (pinging). The engine timing is not retarded, so you get a misfire. The computer turns off the CEL if it sees the car start and run with no misfire of this nature 4 times in a

...engine light, misfire code. When I take it to the mechanic, the car does not misfire. This is the 3rd time the light has come on in 3 weeks. I just had an over heating problem that cause the head to ...

engine light came on and the car started driving roughly so I let a mechanic check it out and he said the code was a misfire in cylinder one. He did a complete tune up on it but it still ran the same.

...misfire. Sometimes takes a while to cure. Problem intermittent. have fitted new fuel pump, filter, changed engine oil, filter, fitted new plugs , leads and coil pack. engine check light comes on ...

Misfire on cylinder No. 3 Check engine light keeps coming on. Shows misfire on cylinder 3. Have changed spark plugs. However, periodically, the check engine light comes back on. The spark plug is ...

...engine misfire that has the potential to damage your catalytic conveter. A diagnostic trouble code has been stored in the vehicles onboard computer that will confirm the engine misfire. Continued ...

...engine to prevent misfires. when this sensor breaks, often times the computer will resort to a "safety" mode and in my case cylinders 1 and 3 misfired as well. I do believe that the computer resorts ...

...Engine Misfire codes for car? http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html Engine Misfire codes? ...

...changed plugs and coil packs its still there. Could it be the injectors ? Could be a bad engine mount. Most every engine has some vibrations. Check vacuum lines