Questions & Answers for: engine idle speed

...engine speed at idle. Check for an idle speed screw designed to keep the throttle plate from closing completely, and an idle mixture screw that limits the flow of fuel at idle. If your carburetor ...

Ad

Question about 1995 Sephia

1 Answer

engine speed decrease when stert the AC IDLE AIR CONTROL VALVE IDLE SPEED TOO LOW. IDLE SPEED SHOULD BE 750 - 850 RPM. IDLE SPEED NEED TO BE CORRECT OR IT WILL CAUSE ENGINE RUN ROUGH OR STALL OUT.AC ...

Ad

Question about 2002 RS 125

1 Answer

engine idle speed, using the tachometer needle, while the engine is running. Ideally, the engine should idle steadily at 1,250 rpm. 4 Adjust the engine idle speed to 1,250 rpm, using the idle adjuster

engine idle speed, using the tachometer needle, while the engine is running. Ideally, the engine should idle steadily at 1,250 rpm. 4 Adjust the engine idle speed to 1,250 rpm, using the idle adjuster

idle after engine warms up after running for about 10 minutes with a cold engine no problem with idle speed. In the cold engine, the engine starts in one kick-start(with choke) and idle speed is good.

engine idle. If it's a high mix screw, its only effect will be at full engine speed. If the engine sounds throaty, turn that screw in 1/4 turn at a time at full engine speed At some magical point, the

...idle speed" nothing else. Thank you Are you having an idle issue ?? Vehicle equipped w/Tachometer ?? Cold engine idle speed ?? Warm engine idle speed ?? Warm engine idle speed @ A/C requested on

engine computer controls idle speed in all conditions . There is nothing for you to change idle speed, you shouldn't even try . Will cause PCM to turn on the check engine light ,that you won't be able

engine idling speed is very high. Is there a idling sensor on engine somewhere? Engine idling speed is high and sometimes idling speed normal. New accelerator cable, coilpack and sparkplugs was fitted

Question about 2003 CR-V

1 Answer

IDLE ON 4200 VORTEX ENGINE Not sure what you mean here. Is the engine idling at too low of a speed or do you wish to adjust the idle so it idles at a lower speed because it's running too fast? If it's

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...