...is a bit sticky. May I suggest that you have it replaced as a matter of urgency; as : "if the engine is too cold, it WILL WEAR OUT in no time at all". .And ..if the thermostat sticks in the ...
...not to turn over. 1. Ignition Switch is in the "OFF" position. 2. Ignition Switch is faulty. 3. Engine Run Switch in the "OFF" position. 4. Engine Run Switch is "FAULTY" or corroded. 5. Check the ...
...to reset the check engine light on Kymco 500 You will need a Engine error code reader and will need to read error codes listed and erase all error codes which will reset the bike check engine
...and all fuses. Now the battery discharges, battery charge light in dash is not on, even when engine is not running. Also speedo needle appears to have gone all the way around, is slightly
...Also check for excess wear on drive sprocket. Hi, Mdankanich3r I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local
...0.2 ohms for a 32 amp system. 4. Then check for continuity between each pin on the plug and frame/engine ground. The meter needle should not move (infinite resistance)(digitals will show infinite ...
...if you get a loud clunk then the solenoid needs to be rebuilt or replaced as necessary. If the engine turns over then replace the starter relay. A motorcycle starter relay is an electronic ...
Usually answered in minutes!
21 Questions
0 Questions
1 Questions