Brushes will not rotate.Square hole that brush fits in will not turn. Pull out the 2 pieces on each end (don't be afraid...use a plyer it will eventually come out) - clean it with WD40 (you'll ...
Question about 25512/ 25513 Progressive Canister Vacuum
Kenmore Canister Vac, Progressive, 25512 255513 model. Brush won't turn. One end of the brush roller, end closest to belt, is off center which is keeping it from turning freely. The end cap is like a ...
Question about ShopVac 3 HP 2 Stage 10 Gallon--Automotive Wet/Dry Vacuum Vacuum
the float to my shop vac is shaped like a cup has an open end and a closed end. I would like to know if the float goes into the lid cage with the open end facing up or the closed end facing up It goes
REMOVING HOSE END I HAVE A KIRBY G6 2001 LIMITED ADDITION- THE ENDS ON THE HOSE GOT CHEWED UP BY MY DOG. HOW DO I REMOVE THE END ON THE HOSE SO THAT I CAN REPLACE IT? I had to replace the hose end on ...
Question about Altima Upright Vacuum Model 2996AVS Vacuum
How do you clean/take apart the roller brush ends. One end turns easily, but the belt end is somewhat harder to turn. one end is usually fixed the other is not :pull staight out on the end with the ...
How to replace just the Kirby 210097 Hose End For G5 Series Vacuum Cleaner to hose. can buy replacement but can not get the broken end off simple and rquires no tools. Fill your sink with hot water ...
I bought a new plastic end piece for the hose but can't get the old one off the hose to change it??? Soak the end of the hose it very hot water to soften the end of the hose. Then insert a screwdiver ...
how to change coupling machine end Hi There, Alec from VacuumSpot here. If by coupling machine end you mean Kirby Hose End Piece <---- (This is a link so you can see the part), then it is really ...
hayden supervac I have a Hayden Supervac in my home. The Beaterbar will not rotate. I took it apart...tried manual rotation, will not turn. The right side appears frozen. Are there bearings in the end
Question about 3041BZ Upright Vacuum
How is it possible for the one end of the brush roll to come off and can I buy it instead of the whole roll? The end that usually "comes off", as you put it, is the belt end of the brushroll. The ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions