...and servicing done but error not removed. plz tell me what i do to remove this error. I had that problem but the only solution i do, alignment of the encoder stripe. what do you mean by
...error message. On line it says t-Bar might have come out of encoder strip or might be dirty. Where is the T-bar located & access to encoder strip so I can see if the problem is there? Help Please I'm ...
...code is the latter then I've found out that it is a CR encoder check error. Check this site out http://printcopy.info/?l=en&mod=erc&brand=Epson&model=Stylus%20Pro%207800 I hope this
encoder check error 00010005CR Motor out of step 00010006CR Motor over current 00010007CR Motor in-position time-out 0001000ACR axis detection error 0001000FCR Motor PWM output faulty 0001001DCR servo
...encoder check error 00010004 CR Motor is DC motor with brushes for driving the carriage. Controlled by CR linear encoder and CR linear encoder sensor. So, check the encoder. It may be dirty or some ...
Question about Stylus Pro 7600 InkJet Printer
...encoder check error". You have to make sure that the Timing strip is centered in the carriage encoder sensors. Do not touch the strip. you have to adjust with the white levers on both sides right and ...
...can produce different kinds of errors. Method 3: The Fall Of The Encoder Strip:- Failure of the encoder strip may cause Epson printer error code 0xe5. Expert Suggestion- Epson Printer Error Code ...
...load error (Printer) Causes • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • PF Motor failure • PF drive mechanism overload (paper jam/foreign object) • Cable ...
Question about Stylus Pro 7600 InkJet Printer
Encoder failure Irregular load You can solve this error by check the connection between the Ink System Unit and the Main Board Assy. Replace the Ink System Unit. For more detail visit the link: https:
Question about Stylus Pro 7600 InkJet Printer
Error Code 0XE5:- 1. Motor driver failure or CR encoder failure is another main reason for this error. 2. When there is no proper connection of your PC with your Printer can easily cause this issue. 3
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
438 Questions
454 Questions