Questions & Answers for: Epson encoder

...for disconnected SP motor-related connectors. the printer needs servicing. check to see if the encoder in in it correct place. my client have a printer epson DFX-9000 printer and it gives 03 ...

...printer Green tabs pulled out & still error message. On line it says t-Bar might have come out of encoder strip or might be dirty. Where is the T-bar located & access to encoder strip so I can see ...

Service Request 00010005 1. The CR Encoder and the T Fence must be free from dust and dirt or any other foreign matters. 2. The CR Timing Belt must be free from any defects and the belt must be in ...

...fully closing, remaining paper, ink buildup on the metal rods on which the carrier slides or the encoder strip being dirty, damaged or missing. the encoder strip is a clear plastic film with ...

...look for any paper that also may be restricting the carriage from moving freely. 00010004CR Motor encoder check error 00010005CR Motor out of step 00010006CR Motor over current 00010007CR Motor ...

Where is encoder's strip? Encoder strip is plastic strip behind the carriage. It's for horizontal measuring. If it's dirty, the result of printing will be "doubled".

...what could be problem? The problem might be " horizontal measuring". It's controlled by linear encoder and linear encoder sensor. Usually, the linear encoder is dirty. Check

CR motor encoder check error 00010004 CR Motor is DC motor with brushes for driving the carriage. Controlled by CR linear encoder and CR linear encoder sensor. So, check the encoder. It may be dirty ...

...I do? Please explain this situation. Thanks. the problem you have is most likely to do with the encoder ( the part which tell the brain where the carriage position currently is-) this looks like

...is an error code F1? Epson XP 225 ode Description PF PID excess load error (Printer) Causes • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • PF Motor failure • PF drive ...