Questions & Answers for: element blew up

...element blew The bake element in the bottom of the oven blew put a big hole in the element. I replaced the element and now the oven will not heat up. Could it be the thermostat or a fuse if it is a ...

...element blew. When checking if the bottom oven was operational the oven light stopped working also. Bought replacement grill element and bolted it on but grill, and all above still not working. Can ...

...blew an element. Replaced it. Won't work. We have a Dacor wall oven model W305. The baking element blew. We order a new one and replace it. The oven still won't work. The oven will turn on (you hear ...

element blew in oven; now stove doesn't work.... oven blew element but stove worked. just moved appliance heard a pop and now stove and clock do not work. it is an FEF322BAWE Sounds like the loose ...

...models are available. If the element checks good it probally blew the relay on the main control board you will know this if you have no power to the element. if i blew a relay then i need a

...blew as well any suggestions? It sounds like the element has a short in it. unplug the range, and take the element out and inspect if for burn marks. check the wires going to the element to make sure ...

...broil switch..if all looks good .then the bake broil switch burnt out when element blew out..plus is the breaker tripped in the box ..it prob. tripped when the element blew out..let me know..good ...

...element blew in the main fan oven of my AEG U3100-4-M (2.5 years old). We have replaced the circular element, but the oven does not work. Neither the fan or light come on. We replaced the lamp with ...

...have no power to cooker and switches ect are working When the element blew , it may have taken out either the selector switch or possibly the toc, if the bulb has blown the oven should still heat up

...blew again. will an open safety thermistat cause this No. A short in the heating element is more likely to blow the thermal fuse. If the thermostat was open, there would be no power applied to the ...