Questions & Answers for: electronic foot control Boating

...436410-20 is the number for your foot control(air electronic) any repair shop should be able to obtain one of these for less than $50.As an alternate,you can use a Singer Replacement 979583-003 ...

...foot contol is defective, in carbon type you must replcace the circular thick carbon.On Electronic control check the IC if this open or some capacitor and resistor are open,Replaced any pars that had ...

...electronic foot control does not work and another one is not available in Nelspruit the good news is it is actually not an electronic foot control and you can order a generic one on line that is a ...

...electronic phase type control. (requires the foot control plug end to be cut off and rewired to the new phase controller). These electronic phase controls can be purchased from EBAY. Stay away from ...

...in order to allow the motor to run slower. That wasted power comes out of the foot pedal as heat. Newer foot controls are electronic and don't get hot. Electronic vs Mechanical Sewing Machine ...

electronic lock-11 760de overlock It might be busted, bring the machine and foot control to a Brother repair shop so they can try your foot control on another machine, and so they can try another foot

electronic foot control on My Elna free arm model SU is not getting power to the machine from the electronic foot control. The light comes on, but the control will not provide power to the machine. ...

...foot control # 436310-20 for my Elna Stella TSP air electronic. How and where I can get this part? I'd suggest www.sewingpartsonline.com if you are in USA. ...

half speed. That's the only way to adjust the speed other than the foot on the pedal. The later models Air Electronic have a slide speed control on the front face of the machine which made life easier

...and electronic foot control. Likely the contact points in the foot control have broken you will have to take I think to Bernina Dealer for repsir If you have 2 different plugs, you have them