Questions & Answers for: Bajaj electric plug

...till now. Another thing is its RPM meter needle keeps flickering violently. To me it seems to be a electricity (stable current) problem. Your views, please? Please tell me still itz get missing on

does cdi affect ignition in pulsar 150 yes the cdi is most importing.the starter coil supply electricity to cdi then cdi forward electricity to high tension coil,and high tension coil forward the ...

Electric start,disc brake. Recently took it for 2nd service. Hi, Essar and the usual suspects are: 1. Spark plugs in bad condition or have an improper gap or are partially fouled. 2. Spark plug cables

...Other thing which I noticed was when I detached the battery from the bike and crank the bike, its electrical equipment like digital speedo meter, head lights, horn etc aren't working ...

...away.That's your wiring.Only other thing could be plugs are not firing under that light load with electric starter,but WILL fire when kick started.Try a plug change.It's happened with me

...electric current from spark plug Hi Arthur, I am sorry you can't find the first and best tool you ever bought for your Bajaj but despair not for a mere $0 you can download another one. For more ...

electric current from spark plug Hi, Anonymous if you have a CKP sensor it needs compression to send the correct signal to the ICM/ECM, make sure both spark plugs are in heads and use a grounded third

...issues with the wiring) - Check for spark again with the new lead and plug cap. That's all the electrical done from start of lead to the end of the plug tip. - Still NO SPARK? Skip to [Magneto ...

...also foul up the carburetors and if so they will need to be taken apart and cleaned thoroughly. 3. Electrical issues causing no sparks. Your engine is turning over and is getting fuel but there is

...plug cables in bad condition. 3. Battery nearly discharged, should have 12.5 volts. 4. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for ...