Questions & Answers for: electric heating rto

...heating element on a atwwod heater? Is the water gas or electric?It could be both.So if it gas then the burner is inside the front cover.If it's a electric one then it would have two wires coming out ...

poilot light is on but furnace will not turn on. pilot light is on, but furnace will not turn on. could it be my thermostat ? check diverter at pilot chech for lint could be gas valve re-light pilot

...of each line. Set the tester to Ohms 1 x 10. Put the multi tester probe to each end of the electrical line, one line at a time. The pointer must point to zero. Otherwise, it must be

Furnace filter gets black within 1 day. Electric furnace is 5 years old I would take apart the burner and have it cleaned out thouroghly for its full of carbon

electric heating not working gas working and heating water but electric heating not working or keeping water hot Make sure switch on water heater at back where electrical wire is attached is in the on

electric heating not working Gas working and heating water but electric heating not working or keeping water hot Have you checked for additional switch, perhaps on rear of water heater on side of ...

...electric is not heating to full hot temp. it only seems to be warm, with periods of cool then back to warm. anyone have a answer for this? Most electric water heaters have 2 heating elements. The ...

when gas switch on an atwood water heater is turned on, the electric switch blinked and unit doesn't light It usually only lights when starting up on propane, or if it didn't ignite for one reason or ...

...heating element if u have electric there then it is a blown element must have water in the water heater when it is on or it will blow an element every time old age and corrosin will cause an ellement ...

I have this model and it turns on then automatically off showing A03 display and turns off. What does that mean and how do I fix it? One of the heat tubes has failed.. need to replace the bad tube.